Chain DID Super Heavy Duty Spring Link | Kawasaki ER-6 650 2012 10030 | Wemoto Australia
  • /CHAIN_LINK/10033089.jpg
  • /CHAIN_LINK/10033089.jpg
This product fits your Kawasaki ER-6 F ECF 2012

Chain DID Super Heavy Duty Spring Link - Kawasaki ER-6 F ECF 2012

Product Code : AB6714

1 In Stock

$3.76 $ 3.76 Incl. VAT

Add to Cart
No Data Found

Application List

Make Model Description Year Country

DID Chain Links

FJ Press-Fit Connecting Link

A clip-type connecting link with a light press-fit construction which gives higher fatigue strength than a slip-fit link while still retaining much of the convenience. It requires more pressure to fit than a slip-fit link, but can still be fitted with a pair of pliers as opposed to special riveting tools required for a rivet link.
No spring link can attain the strength of a rivet link and the FJ spring link has approximately 65% strength of the other links in the chain. However where a rivet link is not feasible then a press-fit link may be used.

DID highly recommends that where possible, a rivet link should be used for any sealed (O-Ring or X-Ring) chains.

Press-fit side plates must be pressed on with long-handled, adjustable pliers. Do not attempt to hammer the side plate into position: this can cause stress to the connecting link and cause it to break while in use.

No Data Found

Created with Sketch.
Back To Top