Suzuki GT 550 A/B 76-77 Tapered Headrace Bearing Set (Japan) - Upgrade see notes [AA3807]

The picture below shows a Tapered Headrace Bearing Set (Japan) - Upgrade see notes. Thousands of other top quality spares listed on our website at refreshingly low prices.

Suzuki GT 550 A/B 76-77 Tapered Headrace Bearing Set (Japan) - Upgrade see notes
Divider

On models that originally took cup and cone steering head bearings, upgrading to tapered headrace bearings is a popular and cost-effective choice. The ball bearings used in the original cup and cone have only two small points of contact on each ball bearing, which makes them more prone to failure than spreading the contact across the entire edge of a tapered bearing. Tapered bearings therefore last longer, and give better stability, than cup and cone bearings.

For some early (pre 1979) Suzuki Models:

When first upgrading from cup and cone to tapered bearings, on some models a modification may be required on the steering stem; please see below:

Stock Steering Stem Modified Steering Stem
Steering stem before modification Steering stem after modification
In order to install tapered bearings on early Suzuki models it may be neccessary to modify the steering stem as per the above sketches. When the stem is modified verify the bearing will slip into place.

A note from one of our customers (owner of a Suzuki GT 380):

"If you want to add a note to say that the stem is mild steel and is easy to reduce, I used a dremel grinder and then polished with fine emery paper."

Divider

All prices are in (AUD)and include GST at 10% where applicable. GST will be deducted at the checkout for goods supplied to outside Australia.

Divider

Buy Now

Part Description Price Quantity  
Tapered Headrace Bearing Set (Japan) - Upgrade see notes [AA3807]
$ 104.08 Information Part Information

Upper 25x48x16mm
Lower 27x48x14mm
Please note on some Suzuki Pre 79 models
you may need to modify the steering stem

Divider
Divider