Replacement spares for Suzuki

• 12 Volt and 6 Volt
• Lead acid, AGM and Gel batteries
• Quick mode change button on front face
• 1 Amp
• Battery Range 1.3-60Ah
• Cable Length 1m (To quick connect plug), 1.1m (Including clamps/eyelet cable)
• Trickle charger
• Quick release plug with cover
• Wall plug compact design
• Weight 0.58Kg

• 12 Volt and 6 Volt
• Lead acid, AGM, Gel and Lithium batteries
• Quick mode change button on front face
• 2 Amp
• Battery Range 1.3-60Ah
• Cable Length 1m (To quick connect plug), 1.1m (Including clamps/eyelet cable)
• Trickle charger
• Quick release plug with cover
• Wall plug compact design
• Weight 0.58Kg

Kit contains 4 parts:
2 Seals
2 Tapered Bearings
Bearings are 55x30x17
WARNING: Seals are unsuitable for
YZF R6 and YZF R1 Bikes

Upper 30x55x17mm
Lower 30x55x17mm

Kit For Single Caliper Contains:

• 8 wiper seals
• 8 dust seals
• 4 caliper joint seals
• 2 stainless steel bleed nipples
• 2 bleed nipple covers
• 4 copper washers
• 1 sachet of red rubber grease

89mm inner diameter
220mm outer diameter
110mm between bolt hole centres
10.5mm counter-bored bolt holes
5mm thick

For Hoses requiring special fittings the banjos can only be supplied in silver.
Made to order, usually 24 hours to manufacture
Two lines in a Kit, Supplied with black heat shrink over the end of the hose
The longer line goes from the Master Cylinder to one of the Calipers,
then Connects both lines using the Double Banjo Bolt and washers on the Caliper.
Run the shorter line over the Mudguard to reach the other Caliper.

For Hoses requiring special fittings the banjos can only be supplied in silver.
Made to order usually 24 hours to manufacture
Two lines in a Kit
Supplied with black heat shrink over the end of the hose

For Hoses requiring special fittings the banjos can only be supplied in silver.
Made to order, usually 24 hours to manufacture
One line in a kit
Supplied with black heat shrink over the end of the Hose

Genuine Suzuki Part
Please allow 5-10 working days when not in stock.

Set Contains One Pin and One Clip
For equivalent genuine part enter:
FOR Suzuki - 69141-45000 in Search For OEM Part,
FOR Kawasaki - 43045-007 in Search For OEM Part.

5 Wire Plug.
7.5 cm Between centre to centre mounting points.

Genuine part does NOT come with O ring

Measurements: Length 330mm, Top 10x30mm, Bottom F.30xM10.
YSS offers a full 2 year warranty on all shock absorbers.
Non stock item will usually arrive in around 10 working days.

**** PLEASE READ THE INSTRUCTIONS FIRST *****
520 Chain to 530 Chain soft rivet link only,
old rivet heads need to be ground off
with an axle grinder before they can be extracted.

A colourless water and rust resistant adhesive spray that coats motorcycle chains
even at high speeds, reducing high speed splatter.
Especially recommended for very fast motorcycles,
Chain Lube Road reduces friction and increases chain durability.